My .bashrc

Here’s something I keep forgetting to save and/or backup, my .bashrc. The last couple of times I reinstalled or switched to another distribution I did remember to backup my dotfiles but I figured I might as well just post it here in case I ever need it again.

Most of it comes from the Arch Linux Wiki, a great place for Linux information even if you don’t use Arch. I have then made a few tweaks from snippets I found on other websites. I can’t remember all of them since at the time I had no intention of posting this here. If you find anything that you think is yours please send me the article link so I can pingback to it. Keep in mind there are some Arch specific sections in there, feel free to edit and redistribute as you see fit.

Since it’s quite a wall of text, I’ll drop it after a break for the website proper. If you’re reading this through an RSS reader, sorry for the wall of text.


# /etc/bash.bashrc
#
# This file is sourced by all *interactive* bash shells on startup,
# including some apparently interactive shells such as scp and rcp
# that can't tolerate any output. So make sure this doesn't display
# anything or bad things will happen !

# Test for an interactive shell. There is no need to set anything
# past this point for scp and rcp, and it's important to refrain from
# outputting anything in those cases.

# If not running interactively, don't do anything!
[[ $- != *i* ]] && return

# Bash won't get SIGWINCH if another process is in the foreground.
# Enable checkwinsize so that bash will check the terminal size when
# it regains control.
# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
shopt -s checkwinsize

# Enable history appending instead of overwriting.
shopt -s histappend

case ${TERM} in
    xterm*|rxvt*|Eterm|aterm|kterm|gnome*)
		PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
		;;
	screen)
		PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
		;;
esac

# Set colorful PS1 only on colorful terminals.
# dircolors --print-database uses its own built-in database
# instead of using /etc/DIR_COLORS. Try to use the external file
# first to take advantage of user additions. Use internal bash
# globbing instead of external grep binary.

# sanitize TERM:
safe_term=${TERM//[^[:alnum:]]/?}
match_lhs=""

[[ -f ~/.dir_colors ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
[[ -z ${match_lhs} ]] \
	&& type -P dircolors >/dev/null \
	&& match_lhs=$(dircolors --print-database)

if [[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] ; then
	
	# we have colors :-)

	# Enable colors for ls, etc. Prefer ~/.dir_colors
	if type -P dircolors >/dev/null ; then
		if [[ -f ~/.dir_colors ]] ; then
			eval $(dircolors -b ~/.dir_colors)
		elif [[ -f /etc/DIR_COLORS ]] ; then
			eval $(dircolors -b /etc/DIR_COLORS)
		fi
	fi

# Reset
Color_Off="\[\033[0m\]"       # Text Reset
 
# Regular Colors
Black="\[\033[0;30m\]"        # Black
Red="\[\033[0;31m\]"          # Red
Green="\[\033[0;32m\]"        # Green
Yellow="\[\033[0;33m\]"       # Yellow
Blue="\[\033[0;34m\]"         # Blue
Purple="\[\033[0;35m\]"       # Purple
Cyan="\[\033[0;36m\]"         # Cyan
White="\[\033[0;37m\]"        # White
 
# Bold
BBlack="\[\033[1;30m\]"       # Black
BRed="\[\033[1;31m\]"         # Red
BGreen="\[\033[1;32m\]"       # Green
BYellow="\[\033[1;33m\]"      # Yellow
BBlue="\[\033[1;34m\]"        # Blue
BPurple="\[\033[1;35m\]"      # Purple
BCyan="\[\033[1;36m\]"        # Cyan
BWhite="\[\033[1;37m\]"       # White
 
# Underline
UBlack="\[\033[4;30m\]"       # Black
URed="\[\033[4;31m\]"         # Red
UGreen="\[\033[4;32m\]"       # Green
UYellow="\[\033[4;33m\]"      # Yellow
UBlue="\[\033[4;34m\]"        # Blue
UPurple="\[\033[4;35m\]"      # Purple
UCyan="\[\033[4;36m\]"        # Cyan
UWhite="\[\033[4;37m\]"       # White
 
# Background
On_Black="\[\033[40m\]"       # Black
On_Red="\[\033[41m\]"         # Red
On_Green="\[\033[42m\]"       # Green
On_Yellow="\[\033[43m\]"      # Yellow
On_Blue="\[\033[44m\]"        # Blue
On_Purple="\[\033[45m\]"      # Purple
On_Cyan="\[\033[46m\]"        # Cyan
On_White="\[\033[47m\]"       # White
 
# High Intensty
IBlack="\[\033[0;90m\]"       # Black
IRed="\[\033[0;91m\]"         # Red
IGreen="\[\033[0;92m\]"       # Green
IYellow="\[\033[0;93m\]"      # Yellow
IBlue="\[\033[0;94m\]"        # Blue
IPurple="\[\033[0;95m\]"      # Purple
ICyan="\[\033[0;96m\]"        # Cyan
IWhite="\[\033[0;97m\]"       # White
 
# Bold High Intensty
BIBlack="\[\033[1;90m\]"      # Black
BIRed="\[\033[1;91m\]"        # Red
BIGreen="\[\033[1;92m\]"      # Green
BIYellow="\[\033[1;93m\]"     # Yellow
BIBlue="\[\033[1;94m\]"       # Blue
BIPurple="\[\033[1;95m\]"     # Purple
BICyan="\[\033[1;96m\]"       # Cyan
BIWhite="\[\033[1;97m\]"      # White
 
# High Intensty backgrounds
On_IBlack="\[\033[0;100m\]"   # Black
On_IRed="\[\033[0;101m\]"     # Red
On_IGreen="\[\033[0;102m\]"   # Green
On_IYellow="\[\033[0;103m\]"  # Yellow
On_IBlue="\[\033[0;104m\]"    # Blue
On_IPurple="\[\033[10;95m\]"  # Purple
On_ICyan="\[\033[0;106m\]"    # Cyan
On_IWhite="\[\033[0;107m\]"   # White


#Random PS1 EDIT
GIT_PS1_SHOWDIRTYSTATE=false
 
if [[ ${EUID} == 0 ]] ; then
  sq_color=$BRed
else
  sq_color=$BBlue
fi
 
export PS1="\n$sq_color\342\224\214\342\224\200\$([[ \$? != 0 ]] && echo \"[$BRed\342\234\227$sq_color]\342\224\200\")[$IBlack\t$sq_color]\342\224\200[\[\033[01;37m\]\u$sq_color]\342\224\200[$BGreen\w$sq_color]\n$sq_color\342\224\224\342\224\200\342\224\200> $BRed\$("") $sq_color\$ $Color_Off"


	alias ls="ls --color=auto"
	alias dir="dir --color=auto"
	alias grep="grep --color=auto"
	alias dmesg='dmesg --color'
	man() {
	    env LESS_TERMCAP_mb=$'\E[01;31m' \
	    LESS_TERMCAP_md=$'\E[01;38;5;74m' \
	    LESS_TERMCAP_me=$'\E[0m' \
	    LESS_TERMCAP_se=$'\E[0m' \
	    LESS_TERMCAP_so=$'\E[38;5;246m' \
	    LESS_TERMCAP_ue=$'\E[0m' \
	    LESS_TERMCAP_us=$'\E[04;38;5;146m' \
	    man "$@"
	}

else

	# show root@ when we do not have colors

	PS1="\u@\h \w \$([[ \$? != 0 ]] && echo \":( \")\$ "

	# Use this other PS1 string if you want \W for root and \w for all other users:
	# PS1="\u@\h $(if [[ ${EUID} == 0 ]]; then echo '\W'; else echo '\w'; fi) \$([[ \$? != 0 ]] && echo \":( \")\$ "

fi

PS2="> "
PS3="> "
PS4="+ "

# Try to keep environment pollution down, EPA loves us.
unset safe_term match_lhs

# Try to enable the auto-completion (type: "pacman -S bash-completion" to install it).
[ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion

# Try to enable the "Command not found" hook ("pacman -S pkgfile" to install it).
# See also: https://wiki.archlinux.org/index.php/Bash#The_.22command_not_found.22_hook
[ -r /usr/share/doc/pkgfile/command-not-found.bash ] && . /usr/share/doc/pkgfile/command-not-found.bash

archey